SGPA Calculator

Add your subjects, their credits and your grades, and your SGPA appears straight away with the working shown. Open the earlier-semesters panel to see your CGPA so far and an approximate percentage.

India Reviewed November 2026By Manikant 5 min read
SubjectCreditsGrade

Letter grades use the common 10-point scale: O = 10, A+ = 9, A = 8, B+ = 7, B = 6, C = 5, P = 4, F = 0. If your university uses a different table, switch to “I’ll type grade points”.

Add earlier semesters to see your CGPA

Enter the SGPA of each earlier semester. Add its credits too for an exact, credit-weighted CGPA.

Semester 1
Semester 2
Semester 3
Semester 4
Semester 5
Semester 6
Semester 7
Your SGPA
—
Working shown, subject by subject
Private. Calculated in your browser.

How to use it

Animated walkthrough of the SGPA Calculator
Quick walkthrough
  1. Choose letter grades, or type grade points if your marksheet uses numbers.
  2. Add one row per subject with its credits and your grade.
  3. Tick or untick the box depending on whether your university counts failed credits.
  4. Open “Add earlier semesters” to turn your SGPAs into a CGPA.

In short

  • SGPA is a credit-weighted average, not a plain average. A 4-credit subject counts twice as much as a 2-credit one.
  • The example loaded in the calculator (six subjects, 18 credits) gives 153 credit points ÷ 18 credits = 8.50.
  • One F in a 4-credit paper turns that 8.50 into 6.50 if the credits are counted, or 8.36 if your university leaves them out.
  • For an approximate percentage, multiply by 9.5. Your university may use a different rule, so check before you put the number on a form.

How to use the SGPA calculator

Start with how your marksheet shows grades. If it prints letters such as O, A+ and B, leave the first box on letter grades. If it prints numbers, or uses letters this calculator doesn’t list, choose “I’ll type grade points” and enter the number for each subject.

Then add one row per subject with its credits and your grade. Subjects with zero credits, such as audit or non-credit courses, don’t enter the SGPA, so leave their credits blank. The SGPA updates as you type, and the table under the result shows every step so you can compare it with your official marksheet.

If you also want your CGPA, open “Add earlier semesters” and enter the SGPA of each previous semester.

How SGPA is calculated

SGPA stands for Semester Grade Point Average. It is the average of the grade points you earned in one semester, weighted by each subject’s credits.

SGPA = Σ (credits × grade point) ÷ Σ credits

Multiply each subject’s credits by its grade point to get its credit points. Add those up, divide by the total credits, and that is your SGPA. The UGC guidelines on the choice based credit system define it this way, and most Indian universities follow the same method. Here is the example loaded in the calculator:

SubjectCreditsGradeGrade pointCredit points
Engineering Maths4A+936
Physics4A832
Programming3O1030
Data Structures3B+721
Electronics2A816
Communication Skills2A+918
Total18153

153 credit points ÷ 18 credits = 8.50.

Why a 4-credit subject matters more than a 2-credit one

A plain average gives every subject the same weight. SGPA doesn’t. Take two students who each got an O (10) and a B (6). The first got the O in a 2-credit paper and the B in a 4-credit paper. The second did it the other way round.

Same grades, different SGPA

Student 1: (2 × 10 + 4 × 6) ÷ 6 = 7.33
Student 2: (2 × 6 + 4 × 10) ÷ 6 = 8.67

The two grades are identical, yet the SGPAs are 1.33 apart. When you are deciding where to spend revision time, the heavy-credit papers are where each grade point is worth the most.

What happens to your SGPA when you fail a subject?

An F carries 0 grade points. What happens to its credits depends on the university. Under one rule the credits stay in the total, so the zero drags the SGPA down. Under another, the failed credits are left out until you clear the paper.

Take the example above and suppose Engineering Maths (4 credits) had been an F instead of an A+:

  • Credits counted: 117 ÷ 18 = 6.50
  • Credits left out: 117 ÷ 14 = 8.36

The tick box in the calculator switches between the two. Your examination regulations say which rule applies, and whether the SGPA is recalculated after you clear the paper in a supplementary exam.

From SGPA to CGPA

CGPA, the Cumulative Grade Point Average, applies the same idea across every semester so far: total credit points divided by total credits. Written in terms of SGPAs, it is a credit-weighted average.

CGPA = Σ (semester credits × SGPA) ÷ Σ semester credits

If every semester has roughly the same number of credits, a simple average of your SGPAs lands very close. It drifts when credits are uneven. A semester of 10 credits at 9.0 and another of 30 credits at 7.0 give a weighted CGPA of 7.50, but a simple average of 8.00.

That is why the calculator asks for credits beside each earlier semester. Without them it falls back to a simple average and labels the result that way, so you always know which one you are looking at.

What counts as a good SGPA?

There is no universal answer, because the grade table changes between universities and “good” depends on what you want next. On a 10-point scale, an SGPA of 8 or above usually means mostly A and A+ grades, around 7 means mostly B+ and A, and around 6 means mostly B.

For campus placements, eligibility cutoffs are set company by company. A minimum of 60% or a CGPA of 6.0 to 7.0 is common, but plenty of companies ask for more and some for less. Read the notice for each company before you rely on a figure from anywhere else, this page included.

Does every university use the same grade table?

No. The calculator’s default is the 10-point scale with O, A+, A, B+, B, C, P and F, which many universities follow. Others print different letters, award different points for the same marks, or use half-points such as 8.5 for one band. The marks needed for each grade also vary: one university may give an O from 90 marks, another from 85.

If your marksheet’s table doesn’t match the default, choose “I’ll type grade points” and enter the number your marksheet gives for each subject. The SGPA formula itself doesn’t change. The table that applies to you is in your regulations booklet or syllabus.

Turning SGPA into a percentage

Applications often ask for a percentage. The calculator shows an approximate figure by multiplying by 9.5, the most common default. Universities have their own rules, though, and the five most-quoted formulas can differ by more than 10 percentage points for the same score. Use the CGPA to percentage calculator to compare them, and follow whichever rule your university or the institution you are applying to specifies. Going the other way, the percentage to CGPA calculator runs the same formulas in reverse.

Questions people ask

How do I calculate SGPA from marks?
Marks first become letter grades and grade points through your university’s grading table. After that, SGPA = Σ (credits × grade point) ÷ Σ credits. If you only have marks, find the table in your syllabus or regulations booklet, look up the grade point for each subject, and enter them using “I’ll type grade points”.
What is the difference between SGPA and CGPA?
SGPA covers one semester. CGPA covers all your semesters so far, weighted by credits. Your last SGPA and your CGPA are only equal in the first semester.
Is SGPA the same as percentage?
No. SGPA is on a 10-point scale at most Indian universities. Converting to a percentage needs a formula, and the formula differs between universities. The CGPA to percentage calculator compares the common ones.
Can SGPA be more than 10?
Not on a 10-point scale. The highest grade point is 10, so the highest possible SGPA is 10.00.
Do audit or zero-credit courses count towards SGPA?
Generally they don’t, because their credits are zero. Leave the credits blank for those subjects. Some marksheets list them as pass or fail only.
Why is my SGPA different from the one on my result?
The usual reasons are a different grade table, a different rounding rule, failed credits handled the other way, or a subject with a different credit value in your scheme. The working table shows each step so you can compare it line by line with the official result.

Sources and methodology

Last reviewed November 2026 by Manikant. Spotted something out of date? Tell us.